MS Pipes

ASTM A333 / A333M

This specification covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements. This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included.

BS-3059

STEEL BOILER AND SUPERHEATER TUBES (BS3059/BS 3059)Low tensile carbon steel tubes without specified elevated temperature properties. Requirements for the plain end, seamless and welded tubes, not exceeding 127mm outside diameter and not exceeding 12.5mm thickness. For use in boilers and superheaters.

IS 3589 Pipes

Product Features:

  • Accurate dimensions
  • Can sustain high pressure & temperature load
  • Rust Proof finish
  • Smooth transition from flange thickness to pipe

Product Usage & Application:

Uses in Paper & Pulp Companies,High Pressure Applications, Oil and Gas Industry, ChemicalRefinery, Pipeline, High Temperature Application, Water Pipe Line, Nuclear Power Plants, Food Processing and Dairy Industries, Boiler & Heat Exchangers.

Size: 168.3mm OD to 2650mm
Tolerance: 4mm To 25mm

IS 1239

Size: 15mm NB to 150mm NB (1/2″ to 6″).
Dimension & Tolerance: IS 1239(part 1) 2004, equivalent to BS-1387/1985
Specifications: IS: 1239(part 1) 2004, equivalent to BS-1387/1985
Surface Finish: Black
Features: corrosion-resistant, high toughness & deformability, high strength

Applications of IS 1239 Steel Pipes

IS 1239 Steel Pipes find their applications is road & parking barriers, agriculture, irrigation, industrial water lines, plant piping, galvanized steel fencings, temporary fencings, roadside railings, steel gates & windows, water pipeline,s sewerage systems, sttructural & fabrication work,l oil pope line,s oil refinery piping, crude oil piping

BS-6323

Seamless and welded steel tubes for automobile mechanical and general engineer purpose Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes. Specific requirements for electric resistance welded(including induction welded) steel tubes covers requirements and defines the chemical composition, mechanical properties, dimensions dimensional tolerances and technical delivery conditions.

ASTM A213 / A213M

This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.

ASTM A210 / A210M

This specification covers seamless medium-carbon steel boiler and superheater tubes. The specification also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. The specification provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending.

ASTM A53 / A53M

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26. The steel categorized in this standard must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard. The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body. A nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard. The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements

ASTM A192 / A192M

This guide covers standard specifications for minimum-wall-thickness, seamless carbon steel boiler, and superheater tubes for high-pressure service. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, and silicon. The tubes shall have a hardness number not exceeding a specific value. The following mechanical tests shall be conducted, namely: flattening test; flaring test; hardness test; and hydrostatic test. This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

ASTM A335 / A335M

This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.

ASTM A179 / A179M

This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test.

ASTM A178 / A178M

This specification covers standards for electric-resistance-welded tubes with minimum-wall-thickness made of carbon steel and carbon-manganese steel to be used in boiler tubes, boiler flues, superheater flues, and safe ends. The steel shall be of Grades A (low-carbon steel), C (medium-carbon steel), or D (carbon-manganese steel). All tubes shall be submitted to heat treatment after welding, followed by cooling. The steel shall conform to stated compositions of carbon, manganese, phosphorus, sulphur, and silicon. Grades C and D shall conform to given tensile requirements, that is tensile strength, yield strength, and elongation. The material shall also be subjected to flattening, flange, tension, reverse flattening, and hydrostatic (or nondestructive electric) tests. Crush test shall also be performed if asked by the purchaser. Minimum elongation values are also given.

ASTM A106 / A106M

This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw

ASTM A334 / A334M

This specification covers standard specification for several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, copper, cobalt, and molybdenum. The number of tubes in a heat-treatment lot shall be determined from the size of the tubes. The tubes shall have a hardness number that does not exceed the prescribed Rockwell and Brinell hardness values. Several grades of steel shall conform to the following tensile properties: tensile strength, yield strength, and elongation. For Grades 1, 3, 6, 7, and 9, the notch-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe, shall not be less than the prescribed values. Several mechanical tests shall be conducted, namely: flattening test; flare test (seamless tubes); flange test (welded tubes); reverse flattening test; hardness test; and impact tests. Hydrostatic or nondestructive electric test shall also be performed.

SS Pipes

SS High Precision and Heat Exchanger Tubes

Length As per Requirement. Maximum up to 24 Meter long.
U- Tubes As per Customer’s Drawing, Developed length up to 36 Meter.
Grades 304/L/H/LN, 316/L/H/LN/Ti, 309, 310/L/H/S, 317/L/H, 321/H, 347/H, 405, 409/L, 410, 430/Ti, 436, 439, 1.4301, 1.4306, 1.4571, 1.4541, 1.4401, 1.4404
UNS S31500, UNS S31803, UNS S2205, UNS S32750, UNS S32760
Specification Seamless – ASTM A-213, A-268, A-269, A-270, A-789, EN 10216-5Welded – ASTM A-249, A-268, A-269, A-270, A-554, A-688, A-789, A-803, EN-10217-7

SS Hydraulic and Instrumentation Tubes

Length As per Requirement. Maximum up to 24 Meter long.
Grades 304/L/H/LN, 316/L/H/LN/Ti, 309, 310/L/H/S, 317/L/H, 321/H, 347/H, 405, 409/L, 410, 430/Ti, 436, 439, 1.4301, 1.4306, 1.4571, 1.4541, 1.4401, 1.4404
UNS S31500, UNS S31803, UNS S2205, UNS S32750, UNS S32760
Specification ASTM A-213, A-269, A-789, EN 10216-5

Stainless Steel Seamless Pipes

Length As per Requirement. Maximum up to 24 Meter long.
Grades 304/L/H/LN, 316/L/H/LN/Ti, 309, 310/L/H/S, 317/L/H, 321/H, 347/H, UNS S31500, UNS S31803, UNS S2205, UNS S32750, UNS S32760
Specification ASTM A-312, A-790

Stainless Steel Welded Pipes

Length As per Requirement. Maximum up to 24 Meter long.
Grades 304/L/H/LN, 316/L/H/LN/Ti, 309, 310/L/H/S, 317/L/H, 321/H, 347/H, UNS S31500, UNS S31803, UNS S2205, UNS S32750, UNS S32760
Specification ASTM A-312, A-554, A-778, A-790

Stainless Steel Box Pipes

Length As per Requirement. Maximum up to 12 Meter long .
Grades As per Requirement.
Specification As per Requirement.